Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.

Add approximately 0.05 g of *** Graphite Powder to a 782-720 Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

美國LECO力可氧氮氫分析儀ONH836 氧氮氫聯測儀系列軟件部分

1、用戶友好界面的Cornerstone軟件

力可專利的Cornerstone氧氮氫分析軟件采用觸摸屏界面使用戶可完整的達到分析控制、方法設定、在線診斷、數據報告。Cornerstone氧氮氫分析軟件允許用戶在單一分析界面中完成日常的所有工作，快速而且簡單易用。力可創新的批次和重復樣品數據分組功能極大簡化了樣品結果輸出和結果標準偏差的自動計算。減少了繁瑣的額外數據處理。

2、軟件特點和優勢

Cornerstone氧氮氫分析軟件分成四個主要部分：分析、診斷、設定、儀器，界面可快速導航和組織。工具條、滑動條和下拉式菜單簡化了校正和數據處理的參數設定。分析軟件同時包括實時的環境參數的檢測，提供完整的系統圖表模擬。高級診斷程序包括全數字化的在線操作手冊、維護模擬演示、圖片說明等提供快速指導。Cornerstone氧氮氫分析軟件同時支持***的數據文檔格式和可變的報告格式。

湖南美國LECO分析儀價格工具條、滑動條和下拉式菜單簡化了校正和數據處理的參數設定。

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a***Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen,the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3i a minimum of three times for each calibration/drift standard used.

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Titanium is a metal that can be combined with elements such as aluminum, vanadium, molybdenum, and tin to produce high-strength, lowdensity, and corrosion-resistant alloys. Titanium alloys are used by the military, medical devices, sporting goods, and aerospace industries because of these properties, and due to the strict demands of these industries, effort needs to be taken to assure that the material meets the highest of quality standards.

配置SmartLine? Remote遠程診斷功能。

736 Series: Oxygen/Nitrogen by Inert Gas Fusion

The 736 family of Elemental Analyzers is designed for routine measurement of oxygen and nitrogen content of

inorganic materials, ferrous and nonferrous alloys, andrefractory materials using the inert gas fusion technique.

These instruments feature our Cornerstone brand ® software, a custom interface designed specifically for

touch-screen operation. Developed by combining longterm research with customer feedback, this easy-to-use

software gives you complete access to instrument control, analysis settings, diagnostics, reporting, and more—without sacrificing valuable bench space.

ONH836儀器通過***采納客戶的反饋意見和創新設計。山東LECO分析儀優惠價格

氧高低雙量程采用3個碳紅外檢測一氧化碳和二氧化碳，保證準確定量。山西專業元素分析儀廠家供應

Procedure - Solid Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3j a minimum of three times for each calibration/drift standard used.

Calibrate/drift following the procedure outlined in the operator's instruction manual.