CROSBY VALUE ADDED

川尚機械設備(武漢)有限公司位于湖北省武漢沌口開發區，注冊資金200萬，專注于吊裝起重解決方案以及涉及到的產品。同時，負責CROSBY 產品的銷售與服務。

公司以"Focused on Service”為經營理念，構建吊裝行業供應鏈，建立NPN合作網絡。 旨在為客戶提供、適用的工業用品，以實現共贏。

CROSBY   G-213 / S-213 Round Pin Anchor Shackles

Forged, Quenched & Tempered, with alloy pins.

? Working Load Limit permanently shown on every shackle.

? Hot-dip galvanized (G) or self colored (S).

? Sizes 3/8 inch and below are mechanically galvanized.

? Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.

? Shackles 25t and larger are RFID equipped.

? Shackles can be furnished proof tested with certificates to designated

standards, such as ABS, DNV, Lloyds, or other certification. Charges for

proof testing and certification available when requested at the time of order.

? Shackles are Quenched & Tempered and can meet DNV impact requirements

of 42 Joules (31 ft-Ib) at -20° C (-4° F).

? G-213 Round pin anchor shackles meet the performance requirements of

Federal Specification RR-C-271G, Type IVA, Grade A, Class 1, except for

those provisions required of the contractor.

? DO NOT SIDE LOAD ROUND PIN SHACKLES.

? Look for the Red Pin®... the mark of genuine Crosby quality.

G-213 / S-213 Round Pin Anchor Shackles

G-213 / S-213 ? Forged, Quenched & Tempered, with alloy pins.

? Working Load Limit permanently shown on every shackle.

? Hot-dip galvanized (G) or self colored (S).

? Sizes 3/8 inch and below are mechanically galvanized.

? Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.

? Shackles 25t and larger are RFID equipped.

? Shackles can be furnished proof tested with certificates to designated

standards, such as ABS, DNV, Lloyds, or other certification. Charges for

proof testing and certification available when requested at the time of order.

? Shackles are Quenched & Tempered and can meet DNV impact requirements

of 42 Joules (31 ft-Ib) at -20° C (-4° F).

? G-213 Round pin anchor shackles meet the performance requirements of

Federal Specification RR-C-271G, Type IVA, Grade A, Class 1, except for

those provisions required of the contractor.

? DO NOT SIDE LOAD ROUND PIN SHACKLES.

? Look for the Red Pin®... the mark of genuine Crosby quality.

Nominal

Size

(in)

Working

Load

Limit

(t)

Stock

No. Weight

Each

(lb)

Dimensions

(in)

Tolerance

(+ / - in)

G-213 S-213 A B C D E F G H N P C A

1/4 1/2 1018017 1018026 .13 .47 .31 1.13 .25 .78 .61 1.28 1.84 1.34 .25 .06 .06

5/16 3/4 1018035 1018044 .18 .53 .38 1.22 .31 .84 .75 1.47 2.09 1.59 .31 .06 .06

3/8 1 1018053 1018062 .29 .66 .44 1.44 .38 1.03 .91 1.78 2.49 1.86 .38 .13 .06

7/16 1-1/2 1018071 1018080 .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 2.13 .44 .13 .06

1/2 2 1018099 1018106 .71 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 2.38 .50 .13 .06

5/8 3-1/4 1018115 1018124 1.50 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 2.91 .69 .13 .06

3/4 4-3/4 1018133 1018142 2.32 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 3.44 .81 .25 .06

7/8 6-1/2 1018151 1018160 3.49 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 3.81 .97 .25 .06

1 8-1/2 1018179 1018188 5.00 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 4.53 1.06 .25 .06

1-1/8 9-1/2 1018197 1018204 6.97 1.81 1.25 4.25 1.13 2.91 2.69 5.16 7.47 5.13 1.25 .25 .06

1-1/4 12 1018213 1018222 9.75 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 5.50 1.38 .25 .06

1-3/8 13-1/2 1018231 1018240 13.25 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 6.13 1.50 .25 .13

1-1/2 17 1018259 1018268 17.25 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10.00 6.50 1.62 .25 .13

1-3/4 25 1018277 1018286 29.46 2.88 2.00 7.00 1.84 5.00 4.19 8.86 12.34 7.75 2.25 .25 .13

2 35 1018295 1018302 45.75 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 8.75 2.40 .25 .13

? Charpy impact properties: Crosby shackles are quenched and tempered and have enhanced impact properties for greatertoughness at all temperatures. If requested at the time of order, Crosby can provide Charpy impact properties.

? Fatigue properties: Fatigue properties are available for 1/3 to 55 metric ton shackles. These Crosby shackles are fatiguerated to 20,000 cycles at 1-1/2 times the Working Load Limit.

? Ductility properties: Typical ductility properties are available for all sizes upon special request.

? Hardness levels and material tensile strengths: Typical values are available for all sizes of shackles, and actual values canbe furnished if requested at the time of order.

? Proof Testing: If requested at the time of order, shackles can be proof tested with certificates.

? Mag Certification: If requested at the time of order, shackles can be magnetic particle inspected with certificates.

? Certification: Certification to world class standards is available upon special request at the time of order; American Bureau ofShipping, Lloyds Register of Shipping, Det Norske Veritas, American Petroleum Institute, RINA, Nuclear RegulatoryCommission, and several other worldwide standards.

? Applications: Round pin shackles can be used in tie down, towing, suspension or lifting applications where the load is

strictly applied in-line. Screw pin shackles can be used in any application where a round pin shackle is used. In

addition, screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limitsare required for side-loading applications. Bolt type shackles can be used in any application where round pin or screw pinshackles are used. In addition, they are recommended for permanent or long-term installations and where the load may slideon the shackle pin causing the pin to rotate.

? Material analysis: Crosby can provide certified material (mill) analysis for each production lot, traceable by the ProductIdentification Code (PIC). Crosby, through its own laboratory, verifies the analysis of each heat of steel. Crosby purchases onlyspecial bar forging quality steel with specific cleanliness requirements and guaranteed hardenability.

? Field inspection: Written instructions for visual, magnaflux, and dye penetrant inspection of shackles are available fromCrosby. In addition, acceptance criteria and repair procedures for shackles are available.

? QUIC-CHECK®: Shackles incorporate two marking indicators forged into the shackle bow at 45° angles from vertical. Theseare utilized to quickly check the approximate angle of a two-legged hitch or check the angle of a single leg hitch. If the load is off vertical or side loaded a reduction in the Working Load Limit of the shackle is required.